Evo MAKIN 200 Multi MIG PFC LCD, Инструкция по эксплуатации

Страница: 25 / 40

| 25 en
N-coder Back button home button
setting the value of the function
TIG DC LIFT - Setting the DOWN SLOPE function
(curren decrease)
the function is used for the continuous termination of the welding process.
together with the eNd curreNt function, it prevents crater formation
at the end of the weld when properly adjusted. during the set time, the
welding current drops to the value of the end current. he function is set in
the range 0 - 10, which adjusts its intensity (0 = off; 10 = maximum). the
function can be modified when selecting a method (see description above) or
during operation on the work screen. activation on the work screen is done
by pressing the back button. the function is selected by gradually rotating the
n-coder. press the n-coder to confirm the function selection. after setting the
appropriate value of the function, press the n-coder to return to the work
screen.
N-coder Back button home button
N-coder Back button home button
setting the value of the function
TIG DC LIFT - Adjust the welding current
the welding current is set using the control n-coder.
Welding current Welding voltage / no load voltage
N-coder
TIG DC LIFT - JOb MODE
save and recall of user programs (save / recall) - same as description in
method mma above.
TIG DC LIFT - Description of screen
saving program Welding method recall program
home Back button post Gas
value
2/4 stroke doWN slope
value
MIG/MAG - Setting the welding process
Manual - user setting of all welding parameters. standard short-circuit / liquid
arc process depending on the set parameters.
Synergic - preset controlled process. the user can correct the welding process.
MIG/MAG - Manual mode
select the welding method by turning the n-coder and confirm by pressing
it.
N-coder
Welding method
after confirming the method selection, a screen appears with the option to
set the selected functions. You can skip the settings by pressing the home
button and go to the work screen, or you can select a function with the N -
-coder and press to confirm the selection. You can then adjust the value of
the function. to return to the function menu, press the Back button. if you
do not want to edit other functions, press the N-coder to go to the work
screen.