Evo affinity 25E Скачать руководство пользователя страница 18

OPERATOR INSTRUCTIONS

A f f i n i t y   2 5 E

Evo, Inc. | 8140 SW Nimbus Ave., Bldg 5 | Beaverton, Oregon 97008 USA

Phone 503.626.1802 | Fax 503.213.5869 | www.evoamerica.com | [email protected]

18

INNER

000F .

Displays temperature for Inner heater element in Fahrenheit degrees 
whenever Inner control knob is selected. The Dot mark after F is 
illuminated whenever the inner heater element is energized. Inner 
display remains illuminated whenever Inner heater element is selected.

OUTER

000F .

Displays temperature for Outer heater element in Fahrenheit degrees 
whenever Outer control knob is selected. The Dot mark after F is 
illuminated whenever the outer heater element is energized. Outer 
display remains illuminated whenever Outer element is selected.

Depressing the round switch located below the On/Off label switches the unit between power 
On and power Off states. Switching the unit On illuminates a green light above the On/Off 
label indicating the unit is active. Depressing the switch a second time powers down the unit, 
and cancels previous settings.

On/Off

Is illuminated whenever there is an increase in temperature adjustment to the Inner or 
Outer heater control knobs. Set remains illuminated until temperature selected is achieved.

SET

Is illuminated as a safety feature to indicate cook surface temperature are in excess of 
150F° or greater. 

HOT SURFACE

Is illuminated to show actual temperature for both Inner and Outer heater element 
whenever Mode switch is selected.

ACTUAL

Depressing the Mode button momentarily displays the actual temperature at both Inner 
and Outer zones of the cook surface. When Mode is fi rst selected, the word Actual is 
illuminated to indicate the temperatures displayed are the current temperatures for Inner 
and Outer zones.

Mode

The Affi nity 25E Commercial cooktop is provided with a COOK Mode that offers a 
temperature range between 150F to 525F:

Low   150, 165, 175, 200, 225, 250.  

Med    275, 300, 325, 350, 375, 400.

Hi   

415, 425, 450, 475, 500, 525.

Temperatures

SET

HOT SUR FA CE

AC TUAL

INNER

OUTER

000F .

000F .

COOK

Mode

On/Off

WARM

EVO AFFINITY 25E ELECTRIC CONTROL PANEL DISPLAY

Содержание affinity 25E






















Отзывы: