EVO Gimbals GP-PRO, Руководство пользователя

Страница: 5 / 10

5 6
GETTING STARTED GETTING STARTED
2
MOUNT ACTION CAMERA
3
CHARGING CABLE (Optional)
Warning
Plug the camera charging cable into
your camera and into the camera
charging port at the base of the tilt
motor.
ALWAYS MOUNT YOUR ACTION CAMERA
BEFORE YOU POWER IT ON!
FAILURE TO DO SO CAN DAMAGE THE UNIT!
1. Unscrew to two thumb screws on the back
of the action camera mount.
2. Slide the action camera all the way until it
touches the Tilt Motor. Tighten the the two
thumb screws.
Thumb Screw
Tilt Motor
4
INSTALL THE BATTERIES
Remove battery end cap and install the
Battery Extension Tube.
Insert both charged 18650 LI-ION
Batteries and screw battery end cap.
5
POWER ON
With the gimbal on a flat non-moving surface
press the Power Button once and wait 4-5
seconds for the gimbal to initialize. You can
then pick up the gimbal and press and hold the
Mode Button for 2 seconds to engage the
motors.
Once powerd on, The EVO GP-PRO starts up
in Pan Follow Mode.
See page 7 for details on the other modes.
Power Button
Battery
Extension
Tube
Battery End Cap
Batteries
Joystick &
Mode Button