Integrated LED Lights:
To turn the lights on or off push the (+) plus key for
2 sec to toggle the light function. The display is also backlit.
Walk assistance
: you can activate the motor to
support you pushing the bike up a hill. Press and keep
depressed the (-) minus button. After 2 seconds the
motor will start with a maximum speed of 6kph (PAS
level must be >0).
USB Charge Port:
to charge your phone you may
open at the back of the display the USB charge port by
removing the rubber plug. Make sure to close the port
neatly after use to prevent any water damage.
Throttle
The right hand side half-throttle allows the rider to add power to the selected
assistance level. This can be useful when starting off or to give you an extra
boost when riding up a hill.
Throttle-only mode: when selecting PAS level 0 no motor
assistance will be provided when pedalling, but the throttle is
still available
Gears
Only change gears while pedalling otherwise the derailleur
might get damaged
If you have to change gears, i.e. to
start off in first gear, lift the rear
wheel using the side stand and turn
the crank while changing gears.
As a rule of thumb, gears on a bike
are changed and used similar to a car
with a manual gearbox.
You will start off in 1
st
or 2
nd
gear, on a
flat road you will choose gear 4 or 5 to
pedal along. Uphill go back to 3 or for steeper hills gear 1. If you ride faster or
downhill choose higher gears.
The assistance level chosen on the display will assist you up to a certain speed.
Choose assistance level and gear according to your needs and riding style.
Watch you crank revelations, if you have the feeling you have to push too hard
13