13
12
1. Chronograph the marker using standard chronograph procedures and
following safety rules. Shooting velocity will vary based upon many
factors, such as paint, weather, and air system.
2. Velocity of the EVIL OMEN
™
is normally adjusted by rotating the
adjusting ring on the regulator. The thread used in this ring is a fine
pitch, allowing for very small adjustments to be made accurately.
Generally, increasing output pressure increases paintball velocity.
(However, see TUNING for a discussion of how excessive regulator
output pressure actually decreases velocity).
To adjust velocity, first loosen the locking screw (3/32 allen wrench
provided) and back the locking screw off three full turns. If the locking
screw is not backed off far enough you will be unable to turn the
adjusting ring. The adjusting ring should turn easily; DO NOT FORCE IT!
NOTE: When turning the Adjusting Ring to reduce velocity, it
is necessary to cycle (shoot) the marker every 1/2 turn. This
is done to relieve the captive pressure in the downstream
portion of the gas system. Failure to do this will result in
premature wear to the sealing seat in the regulator. The
gauge will NOT move unless you cycle the marker as you
adjust the pressure down.
DO NOT EXCEED 300 FPS! You must have a chronograph to know
your speed. Paintballs fired over 300 fps can cause permanent
damage and injury and the extra wear and tear on the marker
may void your warranty.
3. Anytime the velocity is adjusted at the inline regulator, you should also
adjust the recock screw for best performance. If you turn your inline pressure up, you
will have to turn the recock pressure down slightly (Figure 7). See page 26 for complete
tuning instructions.
4. Chronograph the marker after every velocity or pressure adjustment.
5. Chronograph the marker at regular intervals during the day, as well as any time the air source
is refilled or changed, any time the barrel, brand, type of paintballs used, or any part in the air
system is changed, and upon request of any player or game official.
V E LOCITY ADJUSTMENT
WARNING
EVIL OMEN
™
SPECIFICATIONS
Action:
Semi-automatic, true closed bolt cycle, pneumatic recock,
electro-mech firing control, independent hammer and
recock piston (patent pending), external recock regulation
(patent pending)
Length:
19.7 inches
Weight:
2lbs., 7oz
Height:
8 inches
Barrel:
15/16-20 TPI (AC) Stiff Arbor Honed, 0.689 first stage to
0.700 second stage
Special patented anodizing process for durability and low
drag coefficient
14 inch Driver Barrel with Autococker Threads
Feed:
CAM operated Force feed system with anti-doubler arm
(patent pending) and shock absorbing buffer
Paintballs:
For use only with standard “.68 caliber” (.68-inch diameter)
paintballs
Air Source:
Accepts standard connections for CO
2
, regulated N
2
, or
regulated compressed air
Omen Operating Pressure:
200-500 psi recommended
Marker Pressure:
not to exceed 500 p.s.i.
Input Pressure to EVIL Detonator:
not to exceed 1000 p.s.i.
Air Source Input:
bottom line on/off assembly
Grip:
Custom panels to fit 45 style frame
Safety:
On/Off switch and barrel blocking device (included)
Pursuit Marketing, Inc. (PMI Inc.), reserves the right to modify or change its markers without
incurring any obligation to incorporate such modifications or changes in any of its products
that were sold prior to the modification. The information in this operator’s manual may be
updated or changed without notice.
This operator’s manual is intended to remain with the paintball marker upon any subsequent
transfer of the marker, whether through sale, resale, or furnishing in any manner. A replacement
operator’s manual may be obtained from Pursuit Marketing, Inc., 55 Howard Ave, Des Plaines,
Illinois USA; phone 800.579.1633; www.evil-paintball.com
ALL PAINTBALL MARKERS MUST BE CHRONOGRAPHED REGULARLY. ADJUST
MARKER TO SHOOT PAINTBALLS AT A VELOCITY THAT IS LESS THAN 300 FEET PER
SECOND (FPS) AND THAT DOES NOT EXCEED THE VELOCITY LIMIT SET BY THE
PAINTBALL PARK WHERE THE MARKER IS IN USE.
CHRONOGRAPH THE MARKER AT REGULAR INTERVALS DURING THE DAY, AS WELL
AS ANY TIME THE AIR SOURCE IS REFILLED OR CHANGED, ANY TIME THE
BARREL OR ANY PART IN THE AIR SYSTEM IS CHANGED, AND UPON REQUEST OF
ANY PLAYER OR GAME OFFICIAL.
+
–
Figure 6.
Figure 7.
+
–
Re-cock Screw Adjustment
Omen Manual 2.0 6/21/05 9:56 AM Page 12
