EVGA GTX 1080 Ti FTW3 HYBRID, Руководство по установке

Страница: 2 / 12

1.
The following instructions and pictures are provided to assist your installation of the EVGA GTX™ 1080
Ti FTW3 HYBRID Cooling Kit to the EVGA GeForce GTX™ 1080 Ti FTW3 graphics cards. Please be
careful installing the Kit; there are several very small fasteners used that can be stripped if you are not
careful.
Please be sure to keep your original shroud, heatsink, and screws so your card can be returned
to its original condition in case you ever need to submit for warranty.
The instructions below will walk you through the removal of the original heatsink and fan(s), and
installation of the EVGA HYBRID module and replacement shroud. Please see below for SKU’s
compatible with this cooler:
Included Accessories:
11G-P4-6694-KR GTX™ 1080 Ti FTW3 DT
11G-P4-6796-KX
GTX™ 1080 Ti FTW3 ELITE
Part Number Graphics Cards
11G-P4-6696-KR GTX™ 1080 Ti FTW3
2 EVGA HYBRID Memory Heatsink
1 EVGA HYBRID Shroud
4 EVGA VRM Heatsink
3 EVGA HYBRID Pump and Radiator
6
5 EVGA HYBRID Tube Bracket
M2x3.5mm 2pcs screw. Use a Phillips #1 screwdriver to remove or fasten.
P/N:BAA120035017
M2x7.8mm 13pcs screws. Use a Phillips #1 screwdriver to remove or fasten.
P/N:BAA120078001-C
EVA tape insert 1 pcs.
4pcs Screw and 4pcs washer to mount radiator. Use a Phillips #2 screwdriver to
remove or fasten.
Rubber tape insert 2 pcs.
Cable ties 2pcs hook and loop and 4pcs zip ties.
9
M2.5x9.5mm 4pcs spring screws. Use a Phillips #1 screwdriver to remove or fasten.
P/N:BAA125095003-B
M2x7.8mm 9pcs screw. Use a Phillips #1 screwdriver to remove or fasten.
P/N: BAA120078003
1pcs screw nut. Use a 5mm Hex Driver to remove or fasten. Do not use a standard
wrench or pliers, as either may cause damage to the graphics card’s PCB.
P/N: BAA350030000
10
12
13
14
7
8
11
GTX™ 1080 Ti FTW3 ELITE 12GHz 11G-P4-679 7 -KX