15
Compliance Information
FCC Compliance Information
This device complies with FCC Riles Part 15. Operation is subject to the following two conditions:
This device may not cause harmful interference, and this device must accept any interference received, including inter-
ference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are deigned to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the manufacturer’s instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Increase the separation between the equipment and signal source. Connect the equipment to an outlet on a circuit
different from that to which the signal source is connected.
Consult the dealer or an experienced computer technician for help. The use of shielded cables for connection of the
monitor to the graphics card is required to ensure compliance with FCC regulations. Changes or modifications to this unit
not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
CE Compliance Information
EMC Directive 89/336/EEC and Amendment 92/31/EEC, Class B Digital Device EN 50081-14, Generic Emissions
Standard for Residential, Commercial and Light Industrial Products (EN 55022/CISPR 22, Limits and Methods of meas-
urement of Radio). (EN 55022/CISPR 22, Limits and Method of Measurement of Radio Interference Characteristics
Information Technology Equipment) Warning: This is a Class B product. In a domestic environment this product may
cause radio interference in which case the user may be required to take adequate measure. EN 50082-1, Generic
Immunity Standard for Residential, Commercial and Light Industrial Products (IEC 801-2, IEC 801-3, IEC 801-4)
Macrovision Product Notice
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual prop-
erty rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home
and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is
prohibited.
Trademark Information
2001-2009 EVGA Corp. EVGA, the EVGA logo and combinations thereof are trademarks of EVGA Corp. All brands and
companies are trademarks of registered Trademarks of their respective companies. EVGA reserves the right to termi-
nate this license if there is a violation of its terms or default by the Original Purchaser. Upon termination, for any reason,
all copies of the Software must be immediately returned to EVGA and the Original Purchaser shall be liable to EVGA
Corp. for any and all damages suffered as a result of the violation or default.
