get into it!
maintenance
WEEKLY MAINTENANCE
1. Removing Debris
Remove any debris from the Vortex skimmer
and suction guard(s) on the inside of the spa.
Blocked intakes can impede the flow of water
through the jetting system.
2. Water Level
Replenish the water level if necessary so that it is
approximately two-thirds up the Vortex skimmer
opening. (See STARTING YOUR SPA.)
MONTHLY MAINTENANCE
1. Filter Care
We cannot stress enough the importance of a
clean filter for proper water filtration. Dirty filters
can restrict water flow, cause hazy water, and
prevent your chemicals from working properly.
Many water treatment products clear or clarify
the water by clumping microscopic particles and
minerals together so that these larger particles
can be effectively trapped in the filter. A filter
clogged with debris and calcium deposits does
not trap particles properly.
The Maintenance Reminder on the spa-side
Control Panel indicates a CL every 30 days to
remind you to clean your filter.
Removing the Filter
Grasp the edge of the dome-shaped Vortex
filter top, pull up firmly, but gently, to remove it.
Turn the filter cartridge counterclockwise to
unscrew it from its base. Lift out the filter cartridge.
Use a hose to clean the filter cartridge or use
the Marquis Maintenance Kit bucket and Filter
Revive to soak the filters (you will need to flip the
filter after the designated time to completely
clean the entire length). Or a Filter Soak Canister
is available from your dealer to assist in the filter
cleaning process.
NOTE:
Keep an extra set of filters on hand so
you always have a clean set ready for immediate
spa enjoyment. Remember to replace the filter
cartridge at least once a year.
Water level should be
two-thirds up the
Vortex skimmer
opening.
Grasp edge of Vortex
filter top, pull gently.
Turn filter cartridge
counterclockwise to
unscrew.
2 8
