evertz hd9084, Инструкция по эксплуатации

Страница: 64 / 126

HD9084 HDTV Caption Encoder Manual
Page 3-34
OPERATION
SETUP
TIME
then
Set UTC Time
(scroll up/down)
SELECT
SETUP
SELECT
Section 3.7.1
Section 3.7
CDP Time Encode
Section 3.7.3
Disabled
CDP decode
UTC Time
Local Time
LTC Input
UTC - > hh:mm:ss
Date mm/dd/yy
Time Zone = hh:mm
DST On
Off
DSO On
Off
*LTC Time Setup
*LTC Date Setup
UTC Time
Local Time
Leitch
SMPTE-A
SMPTE-B
Not Present
Section 3.7.2
Section 3.7.2
*
LTC Reader option is currently not available.
Figure 3-3: Time Setup Menu
3.7.1. Set UTC Time
The Universal Time, Coordinated (UTC) is an international time standard that defines a time that does
not depend on where we are on Earth. Universal Time (UTC), Greenwich Mean Time (GMT), and Zulu
Time (Z), are based at the prime meridian (0° longitude) of Earth and are used to avoid confusion of
time zones.
To set the UTC time, use the UP and DOWN arrows to scroll to SET UTC TIME and press SELECT .
The user can now configure time, date, time zone, DST, and DSO. The configuration screens will cycle
as followed:
UTC -> 00:00:00
DATE 00/00/0000
TIME ZONE=00:00
DST=OFF DSO=OFF
The flashing characters indicate a selection and can be configured using the UP and DOWN arrows.
When the desired setting is selected, press SELECT to enable the setting. Repeat the process until all
USO
RESTRITO