evertz 7800EMR-HYDRA2, Руководство пользователя

Страница: 22 / 30

7800EMR-HYDRA2
User Manual
Page-14
Revision 1.0
5. Now refresh H2O from the browser and check that under the I/O Box & Setup tab there should be
an entry for the H2M module
6. Go to the Manage Folders tab and under Port Folders click ‘+’ at the bottom and add a folder with a
name ‘Hydra2_Mod-64-inputs’. Add a second folder in the same way for the outputs. I have chosen
64 as that is the HID of my Hydra module.
7. Select the new input folder and under Boxes select the Hydra2 module and highlight all 512 inputs
and press the Ports button at bottom LH corner to transfer all input channels into the new folder.
Repeat the process for the new outputs folder.
8. We are now ready in H2O for port patching across the Hydra2 network. Now for Hydra2 port
patching. In H2O go to the Port Patching tab and under Sources select port folder ‘Hydra2_Mod-64-
inputs’ or whatever you called it. Do the same under Destinations and select the port folder
‘Hydra2_Mod-64-outputs’. As shown in the picture below you can then patch
Figure 4-9 : Patching