evertz 570DSK-25G Series, Руководство пользователя

Страница: 24 / 56

570DSK-3G
/
4K-25G
Logo Inserter
Page 16
Revision 2.0
IGMP Config:
• IGMP Config : Allows user to enable or disable the IGMP. By default, it is enabled.
Video Config:
•
Video Standard: Allows user to choose the video standard for DSK to pass
•
Lane Config: Allows user to choose Single Lane or Multi Lane

Single Lane – Ability to receive and transmit using QSFP 1.1 and QSFP 2.1

Multi Lane – Ability to receive and transmit using QSFP 1.1/1.2 and QSFP 2.1/2.2. it is a
recommended setting for 12G single essence signal.
Controlling Protocol:
•
Protocol: RPC / NMOS / M2100

RPC: Protocol used to control DSK using Magnum

NMOS: Protocol used to control DSK using third party controller

M2100: it is an automation interface protocol to control DSK
SNMP Config:
•
SNMP Trap Destination: Allows user to set the trap ip address to receive the fault.
Media Config:
•
FTP Server: Allows user to set the ip address of the FTP server
•
FTP Path: Allows user to set the path where the logos are located in FTP server
•
FTP User: Allows user to set the username to access the FTP server
•
FTP Pass (Password): Allows user to set the password to access the FTP server
•
Logo Fade Duration: Allows user to set the duration to fade in the logos
•
HDC IP Address: Allows user to set the ip address of the HDC hardware
•
Video Loss Mode:
Allows user to choose the video loss options (Blue Screen, Black Screen &
Frozen frame)
Inband Control:
•
Primary & Secondary: Shows the settings for Primary and Secondary Inband Control.
•
QSFP Port:
Allows user to view the QSFP lanes for primary and secondary Inband control port.
• Control Multicast IP Address: Allows user to view the Control multicast for primary and secondary
Inband control.
• Tally Multicast IP Address: Allows user to view the Tally multicast for primary and secondary Inband
control.
M2100 Control:
•
Control TCP Port:
Allows user to set the port# for M2100 control.
• SDP Control TCP Port: Allows user to set port# for SDP M2100 control.
System Control:
• Reboot: Allow user to reboot the DSK hardware