evertz 2430RX2-10G Series, Руководство пользователя

Страница: 18 / 26

2430RX2-10G Series
10G Video to HDMI/SDI Converter
Page - 10
Revision 0.1
System Control
Load Factory Config: This control allows the SNMP Manager to revert the decoder configuration to
a known factory recommended set. The manager should read the variable prior to setting, to ensure
it is in the 'ready' state. Writing the 'load' command will cause the decoder to cease current
operations and sources and load the factory default configuration settings. This will NOT include IP
interface settings, to ensure network contact is maintained. When the variable returns to the 'ready'
state, the operation is complete. The operator can then manually refresh configuration displays.
Reboot: This parameter allows the SNMP Manager to perform a remote reboot of the decoder. This
is useful when IP interface (and other) changes have been made, and a reset is needed to make
them take affect. The manager should read the variable prior to resetting, to ensure it is in the 'ready'
state. Writing the 'reboot' command will cause the decoder to perform a software restart of the
decoder. Note that the decoder will react immediately to the reboot command, and will not respond to
the SNMP set command.