evertz 1200DD Series, Инструкция по эксплуатации, Страница: 37 / 50

1200DD Series Digital Data Display Manual
Revision 1.8
1200DD - 3-17
3. When you have the correct second digit, press the SELECT button and the third digit will flash. Press
the ITEM button to advance the flashing digit from 0 to 9, or 0 to 5 if the first 2 digits are 25.
4. When you have the correct third digit, press the
SELECT button to accept the first ‘octet’. The display
will show
_000__
with the first 0 flashing. You are now ready to enter the second ‘octet’ of the
address. Entry is the same as for the first ‘octet’, but there is no “ERASE” item.
5. When you have the correct third digit, press the
SELECT button to accept the second ‘octet’. The
display will show
__000_
with the first 0 flashing. You are now ready to enter the third ‘octet’ of the
address. Entry is the same as for the second ‘octet’.
6. When you have the correct third digit, press the
SELECT button to accept the third ‘octet’. The
display will show
___000
with the first 0 flashing. You are now ready to enter the fourth and last
‘octet’ of the address. Entry is the same as for the second ‘octet’.
7. When you have the correct third digit, press the
SELECT button to accept the fourth ‘octet’. If you are
entering the NA or TA items, the menu will go up 1 level to facilitate entering multiple addresses.
The sequence is summarized below. The bold items are the flashing digits.
0 00___
First 8 bit
item
0 0 0___
00 0 ___
_ 0 00__
Second 8
bit item
_0 0 0__
_00 0 __
__ 0 00_
Third 8 bit
item
__0 0 0_
__00 0 _
___ 0 00
Fourth 8
bit item
___0 0 0
___00 0
3.4.12.3. Setting the Internet Address
IC With this menu item, you can set the IP address used for static networks.
See section 3.4.12.2 for IP setting instructions. The default is 10.0.0.1
IA
xxx.yyy.zzz.aaa
3.4.12.4. Setting the Internet Net Mask
IC With this menu item, you can set the IP net mask used for static networks.
See section 3.4.12.2 for IP setting instructions. The default is
255.255.255.0
IM
xxx.yyy.zzz.aaa