evertz 1200DD Series Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 50

evertz 1200DD Series Скачать руководство пользователя страница 22

1200DD Series Digital Data Display Manual

1200DD - 3-2

Revision 1.8

3.2.1. Pushbuttons

The pushbutton group consists of the

SELECT, ITEM

and

SETUP,

pushbuttons and is used to navigate

the

Setup

menu system.

SETUP

Enters the

Setup

menu. When you are in the

Setup

menu the

SETUP

pushbutton is used

to move to the next higher sub-menu level or return to normal operation if at the top level of
sub-menus.

ITEM

When in the

Setup

menu, the

ITEM

pushbutton is used to move to the next item in the

menu system. When in the bottom level of the menu the

ITEM

pushbutton is used to

change the value of the menu item. When at the bottom level, the display flashes when the
active value is shown and stops flashing when inactive values are shown.

When not in the

Setup

menu, pressing the

ITEM

pushbutton makes the display brighter.

SELECT

When in one of the

Setup

menus the

SELECT

pushbutton is used to move to the next

lower sub-menu levels or to select a menu parameter that is to be changed. When at the
bottom level of the menu the

SELECT

pushbutton is used to make the displayed parameter

value active.

When not in the

Setup

menu, pressing the

SELECT

pushbutton makes the display dimmer.

3.2.2. Front Panel Displays

The main LED display on the 1200DD series displays consists of six 7 segment digits and a two character
14 segment alphanumeric display. In normal display modes the six digits are used to display the time or
date. The alphanumeric display is used to display the AM/PM indicator when the time is being displayed
in 12 hour mode. The alphanumeric display is used to display the day of the week when the date is being
displayed.

When in the Setup menu, the alphanumeric display is used to display menu items, and the six large digits
are used as alphanumeric displays to indicate the value of the menu item.  Not all of the alphabetic
characters can be displayed using the seven segment digits.  Figure  3-4  shows the seven segment
displays used to represent the various characters.  Note that some of the alphabetic displays are identical
to some of the numeric displays.

«
...
20
21
22
23
24
...
»

Содержание 1200DD Series



















































Отзывы:

Нет отзывов