evertz 1200DD Series, Инструкция по эксплуатации, Страница: 34 / 50

1200DD Series Digital Data Display Manual
1200DD - 3-14
Revision 1.8
3.4.8. Selecting the Time Display Format
TD With this menu item, you can select whether the time information will be
displayed in 12 hour or 24 hour format.
When set to
12 HR the time information will be displayed in 12 hour format.
The AM or PM indication will be shown in the alphanumeric display.
When set to
24 HR the time information will be displayed in 24 hour format.
The alphanumeric display will be blank unless there is a loss of reference
warning which will cause a flashing U.
12 HR
24 HR
3.4.9. Selecting the Date Display Format
DD With this menu item, you can select the date display format.
YYMMDD
MMDDYY
DDMMYY
3.4.10. Setting the Time
ST With this menu item, you can set the time in the internal clock of the
1200DD. Use the following procedure to set the time. You can press the
SETUP key at any time to exit the Set Time mode without affecting the
clock time.
Press the
SELECT key to begin time entry - all digits blink. Press the
ITEM key to advance the hours digits – the hours digits stop blinking.
Press the
SELECT key to adjust the minutes – the hours digits start
blinking, minutes digits stop blinking. Press the ITEM key to advance the
minutes digits.
Press the
SELECT key to adjust the seconds – the minutes digits start
blinking, seconds digits stop blinking but keep running. Press the ITEM
key to advance the seconds digits. The seconds digits will stop.
Press the
SELECT key to complete the time entry. All the digits will blink
and the seconds digits will start counting as this is now the current time.
Press the
SETUP key to exit the Setup menu and return to the normal
display.
00:00:00