manualshive.com logo in svg

Evers BPT-L19, Руководство по обслуживанию

Поделиться
Скачать
Evers BPT-L19 Скачать руководство пользователя страница 19

3.4 

Service interface (PT-Studio) 

With the Packaging Technology Studio (PT-Studio), the service technician is provided with a tool that helps to iden-

tify problems with the periphery system of the electronics, the electronics themselves and the motor.

The scope of the diagnostics includes the following points: 

●

Motor

● Hall effect sensors

●

Encoder

●

LCD display

●

Switches and connections

●

Buzzer

3.4.1 

Starting PT-Studio and connecting to the device

The program does not have to be installed. Execute the File “Packaging Technology Studio” to start.

►

Then remove two screws (# 283) of the LCD operating unit. Lift the operating unit to release it and only lift it so

far that the Micro USB connector can be accessed.

►

Insert the battery in the tool and then connect to a computer using a USB connecting cable (USB 2.0 connector

A - USB 2.0 connector Micro-B).

Evers GmbH     Graf-Zeppelin-Str. 10     46149 Oberhausen     T49 208 99475-0     T49 208 99475-31     [email protected]     eversgmbh.de

Содержание BPT-L19










































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды