Evergreen EG - 1001, Инструкция по эксплуатации

Страница: 3 / 4

Instruction Manual
Shampoo Gun
EG - 1001
Installation/detaching
the bottle:
Please hold the bottle while installing
or detaching . It might cause the
breakdown as the joint part of the
valve comes off when an upper
T part is turning.
Grip
Outlet
Turn your favorite shampoo into super thick,long-lasting foam. The Suds (2-8μm)
cling to vertical surfaces without running off. Longer presoaking time than tranditional
foamers. Please use the Shampoo Gun in a safe and secure environment.
Read Directions For Use before you use the Shampoo Gun.
Higher pressure (>115 psi) may
cause damages to the equipment
and creates dangerous event.
Please set knob from 0 and below
4. Please refer the left graph for
instruction.
Trigger/Handle:
Hold it, spraying the liquid;
release it, stop spraying the
liquid
Air Reverse Switch:
Switch Between the Spray/
Liquid
Air Adjusting Valve:
Control the distance and
form of the spraying foam
Supplement of Liquid:
Open the cover by screwing in
clockwise direction, fill with
liquid, and fasten the cover.
Air Adjusting Valve is an
optional unit.
● The pressure must be set between 75 to 115 psi; higher pressure
(>115 psi) may cause damage to the equipment and danger
● Use ONLY neutral liquid.
● Specially note that neutral organic solvent cannot be used,because it might
cause deterioration.
Warning Notice
Warning
1