Everglades 2012 275 CC, Руководство пользователя

Страница: 145 / 148

145
Troubleshooting Guide
PRObLEM CAUSE AND SOLUTION
ACCESSORY PROBLEMS
The baitwell pump runs, but does not pump water.
• The strainer on the intake scoop is clogged preventing the
water from getting to the pump. Put the boat in reverse to
clean the strainer.
• There is an air lock in the system. Prime the system.
• The thru-hull valve is not open. Open valve.
The fresh water pump runs, but will not pump water. • The water tank is empty. Fill the tank.
• The intake hose is damaged and sucking air. Replace or
repair the hose.
• The pump is defective. Repair or replace the pump.
The fishbox pump out pump runs, but does not pump out
the fishbox.
• The strainer in the fishbox is clogged. Clean the strainer.
• The pump has an air lock. Fill the fishbox half full of water,
then turn the pump on and off several times to move the air
out and prime the pump.
• The pump discharge line is clogged. Clean the discharge
line.
The fresh water pump fails to turn off after all outlets are
closed.
• There is a leak in a pressure line or outlet. Repair the leak.
• There is an air leak in the intake line. Repair the air leak.
• The pressure switch is defective. Replace the pressure
switch.
• The voltage to the pump is low. Check for corroded or loose
wiring connections or low battery.
• The strainer is clogged. Clean strainer.
• The pump is defective. Repair or replace the pump.
The washdown pump runs, but the pump will not pump
water.
• The thru-hull valve is not open. Open valve.
• The in-line sea strainer for the pump is clogged. Clean the
sea strainer.
The washdown or fresh water pump fails to turn off after
all outlets are closed.
• The intake hose is damaged and sucking air. Replace hose.
• The pump is defective. Repair or replace the pump.
• There is a leak in a pressure line or outlet. Repair the leak.
• There is an air leak in the intake line. Repair the air leak.
• The pressure switch is defective. Replace the pressure
switch.
• The voltage to the pump is low. Check for corroded or loose
wiring connections or low battery.
Reduction in water flow from the bilge pump. • The strainer is clogged. Clean strainer.
• The pump is defective. Repair or replace the pump.
• Impeller screen plugged with debris. Clean screen at the
base of the pump.
• The discharge hose is pinched or clogged. Check discharge
hose and clean or repair.
• Low voltage to the pump. Check the battery and wire con-
nections.