18
SENSITIVITY – Set the sensitivity of the motion detection function.
MOTION VIEW – Switch this function on or off.
DEFAULT – Press Enter on this field to return to the default values.
PRIVACY submenu
Switch this function on and press ENTER to configure privacy
masks.
SELECT – Select one of the possible 8 privacy zones that you
can set up.
DISPLAY – Select ON to activate the zone you selected above.
Press ENTER to open the POSITION screen where you can
position the privacy zone’s indicator block. Press ENTER again
to save the block’s top and left border positions and move on
to the SIZE screen, where you can set the block’s bottom and
right borders.
COLOR – Scroll sideways to change the selected block’s color.
DEFAULT – Press Enter on this field to return to the default values.
LANGUAGE
Scroll sideways to select the language for the OSD. Press Enter on the selection to load that
language. The OSD supports multiple languages including English, Traditional Chinese, Simplified
Chinese and Japanese.
DEFECT submenu
Use this submenu to do Defective Pixel Correction
(DPC).
LIVE DPC – AUTO mode lets the camera automatically
correct pixel defects, so you cannot set the Level. ON
mode lets you choose the LEVEL of Live DPC in the
next field.
STATIC DPC – To run this function, select ON.
START – Press ENTER to start the DPC actions
configured above.
SENS-UP – Increase or decrease the camera’s sensitivity by scrolling sideways.
VERSION
This line displays the Firmware Version of the camera, and can not be adjusted here.
