6
3. INSTALLATION
Steps:
1. Wire and mount the camera. See 3.1
2. Adjust the camera position. See 3.2
Warning
To prevent electrical shock, turn off the electrical power before making electrical connections.
3.1 WIRING AND MOUNTING
1. Use the template and an appropriate tool to drill 4 holes to attach the Speedy-mount ring.
(Note: If the wires from the camera will be routed on the surface, use a pliers or other suitable tool
to grasp the filler closing the surface wire slot and twist to remove the filler to open the wire slot.
If the wires will be routed through the rear of the camera leave the surface wire slot filler in place.)
2. Push the plastic anchors into the 4 holes.
3. Place the Speedy-mount ring against the anchoring surface so that the holes line up. Insert the four
long screws and tighten them firmly.
