EQN2200/2201
Password
: Input the password if the SMTP server requires authentication.
Receiver Address
: Input the e-mail address to receive an e-mail message when
the EVENT is enabled and triggered. Please use “
;
“ to separate address.
ddress
: Input sender’s e-mail address, so that receiver can recognize
e sender when an event message is sent out.
Press
Sender A
th
Send Test Mail
:
button to send a test e-mail to the designated
address.
Set FTP
The settings relating to an FTP server to be used to receive alarm images can be
configured.
FTP Server
: Enter the IP address or the host name of the FTP server.
FTP Port
: Enter the port number for FTP server. Default is 21.
Recording Path
: Assign the recording path.
User Name
: Set FTP User name.
Set FTP password.
de.
Password
:
PASV mode
: Check to enable Passive mode (most sites normally require Passive
mode). If unable to establish a connection, uncheck "PASV" mo
Test FTP Server
: Press
button to send a test file to the designated
FTP server.
Press
Apply
to apply the setting changes or
Reset
to reset without saving the
change.
20
