manualshive.com logo in svg

EverFocus EP-DMD4, Инструкция по установке и эксплуатации

Поделиться
Скачать
EverFocus EP-DMD4 Скачать руководство пользователя страница 2

SAFETY WARNINGS

 

 

•

  Do not place the device near to heaters, furnaces, other heat sources or under 

direct solar irradiation. 

•

  Operate the device only in locations providing the tolerable operating 

temperature range 0°C~50°C. 

•

  For cleaning, make sure the device is plugged off and only use a damp cloth 

without acid detergent. 

•

  Install the device only in dry and dustproof surroundings. Protect the device 

against any liquid’s penetration.  

•

  Avoid the penetration of any artefacts, e.g. through ventilation slots. 

•

  Do not open the device yourself. In case of malfunction, contact your local 

installer or dealer. Unauthorized opening of the device will annul the warranty 
claim! 

•

  Use the device only for purposes described in this manual. 

•

  Operate the device only with the power source indicated in the technical data.  

 
 
 
 
 
 
 
 
 
 
 
 
 

   WEEE 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

ATTENTION!

  This is a class A product which may cause radio interference in a domestic environment; in this 

case, the user may be urged to take adequate measures. 

This Product is RoHS compliant. 

Your EverFocus product is designed and manufactured with high quality materials 

and components which can be recycled and reused. 

This symbol means that electrical and electronic equipment, at their end-of-life, 

should be disposed of

 

separately from your household waste. 

Please, dispose of this equipment at your local community waste collection/recycling 

centre. 

In the European Union there are separate collection systems for used electrical and 

electronic product. 

Please, help us to conserve the environment we live in! 

The information in this manual was current upon publication.  The manufacturer reserves the right to revise and improve his 
products.  Therefore, all specifications are subject to change without prior notice. Misprints reserved. 
Please read this manual carefully before installing and using this unit. Be sure to keep it handy for later reference. 

Содержание EP-DMD4





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды