Stainless Steel 2MP/3MP/4MP Network Cameras
8
Tilt Adjustment: Loosen the two tilt screws on both side and adjust the angle up to 75° to the
desired position, then tighten the tilt screws.
Tilt Screw
0° ~ 75°
7.
Place the supplied Desiccant Bag, tear down the Protection Film from the inside of the cover
and then screw the camera cover back.
Protection Film
Desiccant Bag
Note:
1.
Before start operating the IP camera, please ensure the camera date and time are correct.
To configure the camera date/time, go to System > Date/Time setting page on Web UI.
2.
By default, the system will automatically adjust the IR LED strength according to the scene,
so please avoid IR reflection when installing the camera to prevent out-of-focus at night.
3.
Under Auto focus mode, if the camera does not focus after switching the Day/Night mode,
it is recommended to switch the focus mode to Manual and adjust focus manually.
