ECOR FHD 4F / 8F / 16F Full HD DVR
69
6.2.3
eZ
Hopper
You can just use one mouse to control up to 16 DVRs/NVRs in the same LAN network by
enabling the
eZ
Hopper function.
Note:
Before using this function, you need to set up all the monitors to be the same
resolution, please refer to
6.6.1 Monitor OSD
.
Main Server
Sub Server 1
Sub Server 15
One Mouse Control All DVRs and NVRs
Applies for 960 series / ENVR8304 series / / eZ.HD series
Monitor 1
Monitor 2
Monitor 16
Set up one DVR or NVR to be the
Main Server
, and the rest to be the
Sub Servers
. Then, you
just need to connect a mouse to the
Main Server
, and you will be able to move its cursor
across all the connected monitors of the
Main
and
Sub Servers
and to control their OSD
menus respectively.
Follow the steps below to set up the
eZ
Hopper function:
For the Main Server:
1. Select
Main Server
in the
Mode
drop-down list, and check the
Enable
box.
