(10) EDIT MULTIPLE MOTION AREA
Enter a desired channel, and press
SELECT
to edit a motion area. Please make sure that
MOTION is set as “
Enable
” before entering the motion detection area.
In the motion edit mode:
The default motion area of each camera is
entire screen which displays in light green.
Press
COPY
to start to set an area.
Then press
SEARCH
to end and enable the
area, or press
PAUSE
to end and disable
the area.
Dial
JOG
to select a horizontal or
a vertical area, and press
ENTER
to switch a horizontal or vertical
area.
Press
MENU
to quit the motion area edit.
?
To test a motion area:
Grids will turn into light red from light green when a motion is detected.
?
To clean up the entire area:
Press
PLAY
to clean up the entire motion area.
?
To get a motion area setting hint:
Press
DISPLAY
to get a hint window (shows below) in motion
edit mode.
MENU
COPY
ENTER
SEARCH
PAUSE
- EXIT
-
SELECT AREA
-
CHANGE DIR
- ON AREA
- OFF AREA
41
