Remarks
:
Battery
T
ype is
de
faulted to Gel
.set
tings
is01..
When controller is connected to the battery bank and it is in the on state,
the controller will show the Work Status information. You can set battery
types, DC output in on mode or off mode.
Setting commonly used battery types:
Press ENTER1 button for 3 seconds, the LED display is flashing, LCD
shows battery types(00,01,02,03,04),then you can chose the right one,
then press ENTER1 button for 3 seconds again, the battery type is setted
by you.
7.Parameter Setting
Setting DC output control mode:
Press ENTER2 button for 3 seconds, change on mode or of f mode the
LOAD indicator light changes at the same time.
The LOAD indicator light, DC output on. The LOAD indicator dark, DC
output off.
Number
Types
00
Userdefined
(
by
PC
software
)
01
Gel
02
NiCd
03
Sealed
04
Vented
8.MPPT and PC Connection
Overview
: Ge
t
i
nto
mai
n interfaceas following
Com
Set
ting
(
Com
)
：
Get into set
th
e connection of
Solar
Eagle and PC
.
Monitoring software introduction
Our company had developed PC operational software, customer check
all information of solar system and change some parameters, if have our
company accredit, even could change some original parameters. The
Monitoring software are as following picture:
15
16
www.everexceed.com
www.everexceed.com
7.1
7.2
8.1
