Beware of hot surface.
The solar charge controller can become hot during operation.
Avoid contact during operation. And never put any goods onto
the equipment under load.
●
Symbols on
the
Type Label
Symbol
Explanation
CE
F
CC CB ROHS mark
；
The device
complie
s with the requirements of the applicable
CE F
CC
CB ROHS guidelines.
●
Important
Safety
Instructions
When using the product, please do remember the below information to
avoid the fire, lightning or other personal injury:
Warning!
Ensure input DC voltage no more than Max. DC voltage . Over
voltage may cause permanent damage to solar charge
controller or other losses, which will not be included in
warranty! This chapter contains important safety and operating
instructions. Read and keep this operation guide for future
reference.
Warning!
Authorized service personnel must disconnect both DC and
battery bank power from the solar charge controller before
attempting any maintenance or cleaning or working on any
circuits connected to the solar charge controller .
Before using the solar charge controller, please read all instructions and
cautionary markings on the solar charge controller , and all
corresponding sections of this guide.
Please use components and parts recommended or sold by
EverExceed. Otherwise may result in a risk of fire, electric shock, or
injury to person.
To avoid a risk of fire and electric shock, make sure that existing wiring
is in good condition and that wire is not undersized. Do not operate the
solar charge controller with damaged or substandard wiring.
Do not disassemble the solar charge controller. It contains no user-
serviceable parts.
See Warranty for instructions on obtaining service. Attempting to
repair the solar charge controller by yourself may result in a risk of
electric shock or fire and will make your warranty invalid.
To reduce the risk of electric shock, authorized service personnel
must use insulating tool to operate the device.
Keep away from flammable, explosive materials to avoid fire disaster .
The installation place should be away from humid or corrosive
substance.
To reduce the chance of short-circuits, authorized service personnel
must use insulated tools when installing or working with this
equipment.
5
6
www.everexceed.com
www.everexceed.com
