The software
will
prompt
you to
choose
which
adjustments you wish to make.
Make your
selections on
the screen.
After
the
software
has
asked
you all
pertinent
questions, the screen will display
a
picture of the
Magic
1/0
and will show you what you need to
set.
Physically
set the switches/jumpers on your
board to correspond
with those
"set"
on
the
screen.
The picture
on the
screen points
out
the
correct jumper settings that
will
communicate the configurations
you
indicated to
the
Magic 1/0.
You can now skip the next section.
10
