3
WWW.EVERETIMAGING.COM
QUICK START
1.
Check if following products are in the box
-
Camera
-
DC12V input
-
Power supply cable
-
RS232 Cable
-
IR Remote Control
2.
Power on the camera with the 12V adapter or use a POE+ switch.
PoE+ switch requirements:
(PoE+ IEEE 802.3af/at compliant with total power of 126W up to 30W per port)
Recommended unmanaged PoE+ network switches:
-
TP link TL-SG1008MP 8-port
-
Netgear GS16PP 16-port
3.
Check if you get video output from HDMI or SDI on a display.
NOTE: The default resolution of the camera is 1080P30. If your display does not
support this resolution you can easily change the resolution with the IR remote
control. Please go to chapter:
IR Remote Controller
in this manual and follow
instructions
‘Change video output Resolution for SDI, HDMI and USB 3.0‘
on how to
do this.
4.
Check if you can Pan and Tilt the camera wit the IR remote controller.
NOTE: if you cannot pan or tilt the camera. Please go to chapter:
IR Remote
Controller
in this manual and follow instructions
‘SET Camera 1-4’
on how to do
this.
5.
Please check the default camera IP address (192.168.1.188) for operation in your
network or simply change IP address in OSD menu settings using IR remote
controller. Pl
ease go to chapter: ‘
OSD Menu
’
and follow instructions
‘Change IP
address’
to see how to do this.
