3K02-INS-LAB-RevD19 • 22" x 19" Advantage Recliner User Manual
7
UNFOLDING THE RECLINER (SEE PICTURES BELOW)
1. Engage wheel locks on both sides.
unfolding the recliner
2. Use both hands to push down with even pressure on seat tubes and seat upholstery on insides
of wheelchair, as shown at above far left, until the seat rails are fully seated, as shown at above
far right.
Do not place any fingers or parts of your hand under the seat rails.
3. Attach elevating legrests to wheelchair.
4. Install seat cushion, if so equipped.
INSTALLING THE SPREADER BAR (SEE PICTURES BELOW)
left backpost
spreader
bar hole
spreader bar
slot
spreader
bar hole
left backpost
spreader bar
right backpost
step 1 step 2
1. Install knob through spreader bar hole into left spreader bar attachment rod as shown at above
left; screw in until secure.
2. Lift right end of spreader bar, position spreader bar slot over right spreader bar attachment
rod, and push down gently to trap right spreader bar slot on right backpost spreader bar
attachment rod as shown at above right.
