3K02-INS-LAB-RevD19 • 22" x 19" Advantage Recliner User Manual
23
right rear wheel
wheel lock
shown unlocked
right front frame
adjustment bolt
wheel lock
CROSSBRACES
Tighten crossbraces
M13 wrench, M5 hex key
Check the crossbraces to ensure that the bolt and nut securing both crossbraces in the center of
the wheelchair are secure (crossbraces should be loose enough to fold easily, yet snug enough to
take up excess play). Use an M13 wrench and M5 hex key to tighten.
WHEEL LOCKS
Adjust wheel locks
M10 wrench
1. Use an M10 wrench to loosen the adjustment bolt until the
wheel lock slides on the frame.
2. Place the wheel lock in the locked position and slide it into
contact with the tire.
3. Place the wheel lock in the unlocked position and slide it
3
/
8
" closer to the tire.
4. Use an M10 wrench to tighten the adjustment bolt and
engage the wheel lock to check the fit. The wheel lock
should indent the tire at least
3
/
8
".
5. Repeat steps 1-4 for other wheel lock. Tighten the
adjustment bolts securely to eliminate wheel lock
movement on frame.
WARNING: Ensure that wheel locks are adjusted so that they lock in place appropriately
before occupying or operating wheelchair.
