5
EASY DECISION
INSTALLATION INSTRUCTIONS
The following rules must be strictly followed to obtain optimal air extraction:
•
Keep expansion pipe short and straight.
•
Do not reduce the size or restrict expansion pipe.
•
When using expansion pipe always install the pipe pulled taut to minimize pressure loss.
•
Failure to observe these basic instructions will reduce the performance and increase noise levels of
the cooker hood.
•
Any installation work must be carried out by a qualified electrician or competent person.
•
Do not connect the ducting system of the hood to any existing ventilation system which is being
used for any other appliance ,such as warmer tube, gas tube , hot wind tube.
•
The angle of the bend of the expansion pipe should not be less than 120º; you must direct the pipe
horizontally, or, alternatively, the pipe should go up from the initial point and should be led to an
outer wall.
•
After the installation ,make sure that the cooker hood is level to avoid grease collection at on end.
•
Ensure the expansion pipe selected for installation complies with relevant standards and is fire
retardant.
OPERATING INSTRUCTIONS
NOTE
: Before the appliance can be operated, it must be ducted.
Connect the plug into the power.
FOR RBES692 AND RBES992 PUSH BUTTON OPERATED RANGEHOODS
The rangehood has indication diagrams to allow you to easily select the fan operating speed required.
Push the low button, indicated by a fan with 3 blades, and the motor will run at a low speed.
Push the medium button, indicated by a fan with 4 blades and the motor will run at a medium speed.
Push the high button, indicated by a fan with 5 blades and the motor will run at a high speed.
Push stop button, indicated by an
(O)
and the motor will stop.
Push the light button, indicated by a lit globe and the two lights will come on. Push it again and the light will
turn off.
i 6C
Lo
w
Mi
d
Hig
h
Li
ght
Stop
i 6C
Lo
w
Mi
d
Hig
h
Li
ght
Stop
i 6C
Lo
w
Mi
d
Hig
h
Li
ght
Stop
