3
EASY DECISION
INSTALLATION INSTRUCTIONS
•
Please ensure that before installing the rangehood, all power is switched off.
•
Installation must be in accordance to the local electrical authority and codes.
•
This rangehood must be earthed at all times for the operators’ safety.
•
The switched power outlet for the rangehood should be positioned to enable the user to turn the
power off, to enable cleaning and any maintenance required.
•
The switched power outlet should be installed within 600mm from the rear of the appliance.
•
Ensure that when installing the rangehood, that it is protected from any possible damage from tools
etc.
•
Ducting for this appliance must be installed in accordance to the local authority.
•
Ensure that the fixings used for this rangehood are suitable.
•
Check the area where the rangehood is to be fitted, to ensure that it is structurally sound.
Mounting the V-Flap
If the rangehood does not have an assembled V-flap, you will need to assemble it.
1.
Mount the two halves (2) to the rangehood body (6).
2.
Attach the pin (3) to the flaps.
3.
Attach the axle rods (4) to the rangehood body using the holes (5).
Installation of the Rangehood
If you have an outlet to the outside, your rangehood can be connected as below by means of an extraction duct
(enamel, aluminium, flexible pipe or non-flammable material with an interior diameter of 150mm).
Warning
: The unit must not be connected to a power source before it is properly installed.
1.
The rangehood should be mounted at a distance of 65cm – 75cm above the
cooking surface for best effect. The rangehood must not be mounted closer
than 65cm above the cooking surface. Some cooktops specify a minimum
distance that a rangehood can be mounted above them. If the distance
specified by your cooktop is greater than 65cm, the value specified by the
cooktop must be used.
