EVERDIGM EPG05, Руководство по эксплуатации и техническому обслуживанию

Страница: 6 / 38

- 6 -
Know the rules
Every people who operate or maintain the equipment should know the
meaning, rules and laws in terms of equipment handling. They should
know also the traffic rules, fire service act, emergency measures and
where the relief equipment is.
Keep the fire extinguisher and the first-aid case in the operator
‟s cabin
for emergency use.
Figure 4
1.2. Preparation for safe operation
WARNING!
Read and observe the following instructions on safety.
Install the grab on the suitable carrier
The suitable carrier must be selected taking the weight and hydraulic system of the grab into consideration.
The carrier may fall over if the grab is installed on the carrier, which does not fit the grab. All hydraulic lines
for the grab use must satisfy the specification and quality provided in page 15,
“5.2. Requirements on the
carrier
“.
Protect the operator from the flying splinters
To protect the operator from the heavy concrete elements falling down when the grab is working on the tall
columns, supports and brick, the carrier should be equipped with the cab protector strong enough for the
falling elements. For more information on the cab protector, please consult carrier manufacturer or
EVERDIGM dealer.
Safety instructions on the grab installation
When insert the mounting pin to install the grab on the carrier, the pin holes in the carrier
‟s arm must be flush
with those in the mounting adapter of the grab. For this job, an carrier operator and an assistant should be
careful and agree on the hand signals beforehand. Your finger or hand must not used to check whether the
holes are flush. Once the mounting pins are inserted, lock the pins so that they are not taken off.
If quick coupler is used, be sure clamping is completed. When you connect the hose, tighten the connectors
with prescribed torques.
And make sure of complete connection when you open the stop valve. It may cause personal injury if the
incorrectly connected hose is pressurized. When connecting the hose, be careful not to have the o-ring
damaged or missed, and keep all the connectors clean.