Ever Cool Ltd, Viglen House Business Centre, Alperton Lane, London HA0 1HD
Tel: 020 8601 7157 Fax: 020 8997 0395 Web: www.evercoolltd.co.uk E-Mail: [email protected]
Company Registration No: 6096265 Company VAT No: 809764984
10. Starting Unit
Fill the tank until the LED (minimum level) is extinguished. The unit
will fill automatically from the cooling water supply.
Check hose connections are tight and switch on the pump.
On initial start-up the pump may start and stop automatically due to pressure build
up in the system.
Less than 80°C the unit will automatically bleed air through BLUE HOSE.
Cooling water will flow through heat exchanger to keep away scaling build up in the
heat exchanger.
With the pump selection switch in the O (central) position, neither the pump nor the
heating will function.
11. Inputting Set Temperature Value
Upon switching on the unit, the set temperature value and the measured process
value will appear in the digital display.
Press < and the first digit to be set will flash. Press
keys to set the value and
to
confirm the data. Repeat the operation for the other digits.
AUTOTUNING function (automatic search temperature)
Pressing
during 10 seconds T sign will appear in the display when this sign
disappears the unit will have the suitable parameters for one precise process
temperature.
12. Adjusting Additional Control Parameters
It is not normally necessary to change any control parameters other than the set
temperature value as described above. However, the electronic circuit of the unit has
six additional control parameters from SET 0 to SET 8.
To change the set values to additional SET control parameters, press
and
simultaneously for 25 seconds, will visualize the first SET press
to go the
wanted SET press
will appear the first valve, press again
to allow change dates
press
and the first digit to be set will flash modify it with
keys press
confirm.
