Eventide SplitEQ, Руководство пользователя

Страница: 15 / 19

Spectrum Analyzer
The Spectrum Analyzer displays the spectrum of one or more signals on the plot. SplitEQ’s
analyzer is especially useful because it can display the spectrum of the Transient and
Tonal signals as well as the plugin’s input and output.
The controls for the Spectrum Analyzer are located in the bottom right corner of the
plugin. The first button turns the analyzer on and off. The second button pops up a
panel with additional settings for the analyzer. Finally, the Pre and Post buttons adjust
the routing of the analyzer.
Analyzer Settings
Source The spectrum analyzer has four source options:
• All – the summed Transient and Tonal signals.
• Split – separate views of Transient and Tonal signals.
(pre or post)
• Transient – only the Transient signal.
• Tonal – only the Tonal signal.
Routing Selects pre and/or post-EQ routing for the spectrum analyzer.
When Source is set to Split , the analyzer can be either pre or
post, but not both.
Resolution Adjusts the resolution of the analysis.
“Best for Frequency” and “Better for Frequency” will capture
more detail about the frequency, but with less frequent up-
dates.
“Better for Time” and “Best for Time” will show less frequency
detail but update more often.
Decay Sets the decay rate for the peaks of the analyzer.
12