Evenflo SureRide, Руководство пользователя

Страница: 28 / 31

53
52
Installing Child Restraint Forward-facing in
Aircraft
A
3
Fasten the aircraft seat belt
A
.
The aircraft seat belt must be as tight as possible. Route
the excess aircraft seat belt strap
C
back through the
forward-facing belt path
D
opening, as shown above.
Using your full weight, push the child restraint firmly onto
the aircraft seat while pulling on the excess seat belt strap
to tighten.
Note: Because of the fixed length of aircraft seat belts, the belt
buckle could be behind the child’s back after tightening the
belt. For your child’s comfort, Evenflo recommends cushioning
the child’s back by placing a small pillow or folded-up blanket,
or a folded-up jacket, over the belt buckle.
Check your work. Reconnect the seat pad to the front
of the child restraint. Try to move the child restraint in all
directions. If you can move the restraint more than 25 mm
(1 inch) from side to side or front to back at the forward-
facing belt path, the aircraft seat belt is not tight enough,
and you MUST install again until the seat belt is tight.
C
D
4
To order replacement parts, you can order online at
www.evenflo.com or contact Evenflo. When you contact us,
please have the product model number and date of
manufacture (found on the back of the child restraint).
Replacement Parts
Head Pillow
Cup Holder 9
Not available on all models. Styles may vary.
Crotch Strap
3
Seat pad
13
Harness 4
Head Foam
Proper Disposal of This Child Restraint
At the end of this child restraint’s useful life, Evenflo
encourages you to dispose of it properly. Most of the
components in this child restraint are recyclable.
1. Remove all fabric and padding.
2. Remove all screws and disassemble the restraint.
3. Recycle all plastic/foam parts and discard the rest.
If your local recycling center won’t accept the padding,
you may dispose of it in the landfill.
NOTE: Evenflo uses recycled materials in the
manufacturing process whenever possible but never for
components that are critical for safety.
Body Pillow 12
1
Tether
7
Lower Anchor
Connector
Assembly
5
8
Chest Clip
2
Locking Clip:
Not included
with child
restraint, see
page 18 or 27
Lower Anchor
Connector
Assembly with
Quick Connectors
6
11
10
Tether Extender:
Not included with
child restraint