Evenflo Portable BabySuite, Инструкция по эксплуатации

Страница: 10 / 40

upward.
WARNING
Note: Tubes are pre-installed on the bassinet and require only to be To avoid serious injury or death:
connected.• Check to ensure bassinet is fully secure by firmly pressing down on all four Connect one set of tubes
D
and
E
together, as shown. Make corners of the mattress pad.
sure they are securely connected. Repeat for the other set of • DO NOT use bassinet with children over 15 lbs (6.8 kg). Discontinue use tubes.when child begins to push up on hands and knees or can roll over.
• FALL HAZARD: To prevent falls, do not use this product when infant begins to push up on hands and knees or has reached
manufacturer’s recommended maximum weight, whichever comes first.
To use the mattress pad
A
with the bassinet, place it on the bassinet, cushion side up. Push down firmly on the mattress to
attach the Velcro straps.
Insert the six mattress straps
J
on the mattress pad through the slots
K
in the bassinet and fasten them to the Velcro tabs on
the underside of the bassinet. Make sure all six straps are properly secured to the bassinet. Note: The mattress pad must
always be used with the Velcro tabs facing downward to secure the pad to the floor of the bassinet.
ASSEMBLING THE CHANGER
Connect an elbow tube
A
to the straight tube
B
. Make sure they snap together securely with an audible click. Pull the tubes to make sure they are securely attached to each other.
Insert the end of tube assembly
C
into a corner opening on the changer
D
, as shown.
Push the tube assembly
C
completely through the changer until it comes out of the other opening, as shown.
Connect the other elbow tube
E
to the tube assembly
C
. Make sure they snap together securely with an audible click. Pull the tubes to make sure they are securely attached.
4 5
ATTACHING THE CHANGER USING THE CONVERTIBLE PLAYMAT