Evenflo Nurture, Руководство пользователя

Страница: 21 / 27

38 39
Thread the seat
belt
B
through the
base
C
(or child
restraint) and
buckle the seat belt.
Push down on the
base C while pulling
the shoulder belt
D
tightly to remove all
slack from the lap
portion of the belt.
D
Using the Locking Clip
1
2
B
C
WARNING
Remove locking clip from vehicle seat belt when
not used with a child restraint, or the vehicle
seat belt will not properly restrain an adult or
child. Serious injury could occur.
C
• If installing the convenience base with a vehicle seat
belt, return to page 22, Step 1.
• If installing the carrier (no convenience base) with a
vehicle seat belt, return to page 29, Step 3.
13 mm (1/2 inch)
4
5
Hold the lap and
shoulder belts together
just behind the free
sliding buckle
tongue E and unbuck-
le the seat belt.
While holding the belts
and buckle tongue
E
,
thread the locking
clip
F
onto the seat
belt, and slide it into
place.
Note: Locking clip
must be placed within
13 mm (1/2 inch) of
seat belt buckle.
3
E
F
E
F
Buckle the seat belt
with the locking
clip
F
in place.
F
To watch a video about installing a locking clip, go to
www.evenflo.com .
Locking Clip
installed properly.
If your vehicle is model year 1996 or newer, it likely
has a vehicle belt system that can be locked when
tightened, and will not require use of a Locking Clip.
Consult your vehicle owner’s manual before
installing a Locking Clip.
Install Locking Clip,
if necessary.
If your vehicle was
built
prior to model
year 1996, and has
a lap/shoulder belt
that is equipped with
an emergency locking
retractor (ELR) AND sliding
latch plate, you
MUST use
a Locking Clip. Check your
vehicle owner’s manual to
identify which vehicle belt
system is in your vehicle.
Install Locking Clip, if necessary.
If your vehicle was
built
prior to model year 1996, and has
a lap/shoulder belt
that is equipped with
an emergency locking retractor (ELR) AND sliding latch plate,
you
MUST use a Locking Clip. Check your vehicle owner’s
manual to identify which vehicle belt system is in your vehicle.
13 mm
(0.5 inch)