Evenflo Nurture, Руководство пользователя, Страница: 16 / 27

28 29
Installing the Carrier Without
the Base
After securing the infant, place the restraint into your
vehicle. Adjust the restraint so that the level line
A
is
level with the ground.
Note: Generally, the center rear seating position is the
safest. This infant restraint MUST face the rear of
the vehicle.
Rotate the handle to
Position 4 by squeezing
both handle releases
B
at
the same time.
1
2
B
A
Route ONLY the
lap portion of the
vehicle seat belt
through the belt
slots
C
on the car-
rier.
In vehicles with a
lap
and shoulder
belt
D
, DO NOT
route the shoulder
belt through the
belt slots. Instead,
let it lay across the
vehicle seat back, as
shown.
LAP BELT
LAP AND SHOULDER BELT
D
C
3
IMPORTANT: Some ELR vehicle belts can be switched so
that they lock when tightened. It may not be necessary
to use a locking clip in these situations.
To install a locking clip, refer to p. 38.
Refer to the vehicle owner’s manual to determine which
type of belt retractor is in the vehicle.