28
29
1. Thread the looped end of the shoulder belt clip belt
through the anchor point on bottom of the booster.
2. Thread the shoulder belt clip through the loop at the
end of the belt and pull until tight.
Note: Use the Shoulder Belt Clip only when necessary
to position the belt so it lays across the child’s chest
midway between his/her shoulder and neck.
3. Place booster on the vehicle seat and attach the
shoulder belt clip to the vehicle shoulder belt.
4. Pull the adjustment strap until belt clip is even with the
child’s shoulder and the vehicle shoulder belt lays across
the child’s chest midway between his/her shoulder and
neck.
Using the Shoulder Belt Clip
• Plastic parts may be wiped clean with mild soap and
water and dried with a soft cloth. Do not use abrasive
cleaners or solvents.
• Take care not to damage any labels.
• The seat pad (except for leather seat pads—not available
on all models) can be machine washed separately in cold
water, delicate cycle, tumble dry
10 – 15 minutes on low heat.
•
NEVER
use booster seat without the seat pad.
To help protect the
vehicle upholstery, place a
towel beneath and behind
the booster seat.
T
ip
!
Care and Cleaning
