5
4
Identification of Parts
Before First Use
Before First Use
IMPORTANT:
Before using your breast pump, disassemble and sanitize
thoroughly. Always wash hands well with soap and water before handling
your pump.
1
2
Remove the pump unit
A
from
flange assembly
B
by pulling up on
pump unit, as shown.
Remove diaphragm
C
and flange
insert
D
from flange assembly
B
.
B
A
D
C
3
Unscrew bottle
E
and twist valve
G
to
remove from assembled flange unit
F
.
Remove membrane
H
from valve
I
.
To Sanitize Parts on the Stove:
Place disassembled pump parts (except the pump unit and AC adapter) in a
pan of boiling water for 5 minutes.
Stir frequently.
DO NOT allow parts to
rest on bottom of pan as they may melt or become damaged.
To Sanitize Parts in the Microwave:
These pump parts may be used with a microwave sanitization device
(except the pump unit and AC adapter). Please follow device manufacturer’s
instructions.
Single
Pump Unit
AC Adapter
WARNING
NEVER immerse pump unit or
AC adapter in water or attempt
to sanitize in a microwave oven.
Damage to parts and oven may
occur.
DO NOT BOIL OR WASH
Before EVERY Use
• Wash your hands with soap and water before handling your pump.
• Ensure parts are clean and dry. Refer to cleaning instructions on page 11.
• Use care when handling the valve/membrane assembly to avoid damage.
• Visually inspect the individual components for cracks, chips, tears,
discoloration or deterioration. In the event that damage to the device
is observed, please discontinue use until the damaged parts have
been replaced.
H
I
G
E
F
AC Adapter
Single Pump Unit
Flange
(30.5mm)
Stand
Diaphragm
Bottle Cap Ring
Sealing Disc
Valve
Membrane
*28.0mm Flange Insert
* Additional sizes are available separately. See page 8.
Bottle
B
