7
7. Place the anti-tilt mounting hooks on both sides of the top surface of the hood,
screw in the 2 pcs ST4×30mm screws and lock them, and fix the hood to prevent
the hood from falling. See pic 6.
8. After putting one end of the expansion pipe into the joint, tighten the four screws on
the joint to fix the expansion pipe, see pic 7. Put the joint into the outlet and tighten
it clockwise, then lead it to the outdoor. See pic 8.
9. Place the chimneys in the appropriate position on the top of the hood and lock the
outside chimney with 2 pcs ST4×10mm screws. Lift the inside chimney to the
position of the inside chimney bracket, then fix it with 2 pcs ST4×10mm screws,
and finally insert the oil cup into the bottom of the hood. See pic 9.
HINTS FOR EXHAUST DUCT INSTALLATION
The following rules must be strictly followed to obtain optimal air extraction:
• Keep expansion pipe short and straight.
• Do not reduce the size or restrict the expansion pipe.
• When using the expansion pipe always install the pipe pulled taut to minimize
pressure loss.
• Failure to observe these basic instructions will reduce the performance and increase
noise levels of the cooker hood.
• Any installation work must be carried out by a qualified electrician or competent
person.
•Do not connect the ducting system of the hood to any existing ventilation system
