12
3. Use a soft brush to brush it gently with a mild detergent. Then dry with a clean and
soft rag. Please do not apply too much pressure, avoid to damage it.
Note:
All cooker hood filters are made of metal. Please do not use cleaners that
corrode metal products when cleaning. It is advisable not to use rinse aid.
BULB REPLACEMENT
Important :
The bulb must be replaced by the manufacturer, its
service agent or similarly qualified persons.
Always switch off the electricity supply before
carrying out any operations on the appliance. When
handling bulb, make sure it has completely cooled
down before any direct contact to hands.
When handling blubs hold with a cloth or gloves to
ensure perspiration does not come in contact with
the blub as this can reduce the life of the bulb.
Note:
⚫
Before changing the lights, make sure that the appliance is turned off and
unplugged.
⚫
Protect against danger when changing lights, such as wearing gloves.
Changing the lights:
➢
Turn on the cooker hood and turn off the power after the cover glass is opened
fully.
➢
Use straight screwdriver to prize up the LED light bottom edge, then slightly pull
out the LED light and light connecting wire.
➢
Apply the reverse procedure to install the light back.
• ILCOS D code for this lamp is: DSS-1.5/65-S-70/28
– LED modules –rectangle lamp
– Max wattage: 2
×
1.5 W
– Voltage range: DC 12V
– Dimensions:
