20
Using the Touch Controls
• The controls respond to touch, so you don’t need to apply any pressure.
• Use the ball of your finger, not its tip.
• You will hear a beep each time a touch is registered.
• Make sure the controls are always clean, dry, and that there is no object (e.g. a utensil or a
cloth) covering them. Even a thin film of water may make the controls difficult to operate.
Using your Hob
To start cooking
• After power on, the buzzer beeps once, all the indicators light up for 1 second then go out,
indicating that the hob has entered the state of standby mode.
1. Touch the ON/OFF control.
After power on, the buzzer beeps once, all displays show “–” or “– – ”, indicating that the
induction hob has entered the state of standby mode.
2. Place a suitable pan on the cooking zone that you hope to use.
Make sure the bottom of the pan and the surface of the cooking zone are clean and dry.
