Eve Audio sc3010, Руководство по эксплуатации продукта, Страница: 11 / 24

EVE Audio product manual
Settings Menu
11 OPERATION
Turn the knob to adjust the volume. Depending on the LED mode selected
(see “3.11. LED Mode” on page 14), the volume will be displayed as a
dim/bright circle or as a dim/bright point.
The control’s response curve is not linear. The increments become finer as
the volume increases:
-80 dB (minimum) to -48 dB:
2 dB
-48 dB to -20 dB: 1 dB
-20 dB to 0 dB (maximum): 0.5 dB
• Mute
To mute the monitor, turn the Volume control counter clockwise until you
reach the minimum level. When the LED on the left end lights up dimly the
Mute mode is activated.
!
To exit the Mute mode simply turn the control clockwise until you reach
the desired volume.
3.6. Settings Menu
Press the control once to enter the Settings menu. Here you can set three
different filters (Low, Desk, High), as well as the LED ring‘s behavior. The
LED of the currently active function will blink.
Turn the control to choose the filter or LED mode desired. The blinking
LED indicates the function selected, while the steady-on LED indicates the
value assigned to that function.
Press the control to confirm your selection. The blinking will stop once the
selection is confirmed.
Turn the control to adjust the filter or the LED behavior.
When you are satisfied with the setting, press the control again to go back
to the Settings menu. You can then select and edit another function.
!
To exit the Settings menu press and hold the control for three seconds or
simply wait 10 seconds. The loudspeaker will then return automatically to
the Volume mode.