EVCO S.p.A.
Vcolor 818
| Installer manual ver. 1.1 | Code 144VC818E114
page 59 of 94
11.2
Setting the configuration parameters
Operate as follows:
1.
Make sure that the instrument is in the “on” status.
2.
Make sure that the keyboard is not locked and that no procedure is in progress.
3.
Press and release the HOME key (1), press and release the MENU key (2) and then press and release the
key repeatedly (3) in order to select the “
PARAMETERS
”.
4.
Press and release the SET key (4), repeatedly press and release the - key (5) to set “
-19
”and then press and
release the SET key (6) again.
Operate as follows to select a parameter:
5.
Press and release the key (7) or the key (8).
Operate as follows to set a parameter:
6.
Press and release the + key (9) or the – key (5).
Operate as follows to exit the procedure:
7.
Press and release the ESCAPE key or do not operate for 60 s.
Cut the device power supply off after setting the configuration parameters.