EVCO S.p.A.
Vcolor 869/879
| Installer manual ver. 2.2 | Code 144VC869E214
page 38 of 94
Pressing this area enables selection of a drying cycle (a function activated with the door closed); see
section 8.7.
Pressing this area enables selection of a retarding proofing cycle (a function activated by parameter);
see section 8.8
Pressing this area enables selection of a slow cooking cycle (a function activated by parameter); see
section 0
The retarding proofing and slow cooking functions are available on condition that the expansion module is in use and
parameter E12 is properly set.
8.1
Fish sanitation
Pressing this area enables selection of a fish sanitation cycle.
This special cycle consists of the following phases:
-
blast chilling with the cabinet set point set by parameter r19 and with the product temperature set point
set by parameter r20;
-
holding for the time period set by parameter r21 and the cabinet set point given by r20;
-
conservation with the cabinet set point given by r22.
The arrows at the top make it possible to move between the various sanitation phases to see/modify the set points.
After the function is selected, the screen with the pre-settings will be shown, that can be modified.
Pressing the
key starts up the sanitation.
While a sanitation cycle is in progress the device will show the temperature to end blast chilling, the working set point
during blast chilling and the duration of the holding phase.
