Evco EVJ LCD, Руководство пользователя

Страница: 20 / 24

EVCO | 19.09.2022 | AZ | 20 114VJLCDE204
EVJ LCD -
Remote user interfaces
“nEt > Itb” menu
N. Param. Def. “nEt > Itb” menu Min/max
13 nOd 4 INTRABUS node 1... 127
se EU3C=On,
nOdE=3
14 StA - INTRABUS status
communication OK... Err
15
nrH - Number of received
INTRABUS packages 0... 999
16 ntH - Number of
transmitted INTRABUS
packages 0... 999
17 nEr - Number of INTRABUS
receipts in error 0... 999
18
bAu - INTRABUS baud rate 19200
19 Stb 1 INTRABUS bit stop
number 0... 2
20 PtY 2 INTRABUS parity 0... 2
“NET > BLE” menu
N. Param. Def. “NET > BLE” menu Min/max
21 StA - Enable Bluetooth On... OFF
22 nrH - Number of BLE
packages received 0... 999
23 ntH - Number of BLE
transmitted received 0... 999
24 nEr - Number of intercepted
BLE errors 0... 999
25 bAu - BLE baud rate 19200
26 Stb 1 BLE bit stop number 0... 2
27 PtY 2 BLE parity 0... 2
“diA” menu
N. Param. Def. “diA” menu Min/max
28 MEm - EEPROM memory
status OK... Err
29
PSU - Power supply voltage
status OK... Err
“nEt > Itb” menu
Key Instructions
Touch SET key for 7 seconds:
the display will show “ Mnu ” and “ Inf ”
Touch DOWN key twice:
the display will show “ Mnu ” and “ nEt ”
Touch SET key:
the display will show “ nEt ” and “ Itb ”
Touch
SET
key
Touch UP or DOWN keys to see the parameters
Touch ON/STAND-BY key few times to return to the
previous displays
“NET > BLE” menu
Key Instructions
Touch SET key for 7 seconds:
the display will show “ Mnu ” and “ Inf ”
Touch DOWN key twice:
the display will show “ Mnu ” and “ nEt ”
Touch SET key:
the display will show “ Mnu ” and “ Itb ”
Touch DOWN key:
the display will show “ Mnu ” and “ bLE ”
Touch SET key
Touch UP or DOWN keys to see the parameters
Touch SET key to access the value
Touch UP or DOWN keys to set-up the value
(available only for “Pty” parameter)
Touch
SET
key to confirm the value
Touch
ON/STAND-BY
key few times to return to the
previous displays
“diA” menu
Key Instructions
Touch SET key for 7 seconds:
the display will show “ Mnu ” and “ Inf ”
Touch
DOWN
key three times:
the display will show “ Mnu ” and “ diA ”
Touch SET key
Touch UP or DOWN keys to see the parameters
Touch ON/STAND-BY key few times to return to the
previous displays