EVCO S.p.A.
EVF 300 series | Installer manual ver. 1.3 | Code 144F300E134
Page 9 of 62
2.3
Installation warnings
-
make sure that the device work conditions (temperature of use, humidity, etc.) lie within the limits indicated; see chapter
19 “TECHNICAL DATA”
-
do not install the device near to any heat sources (heating elements, hot air ducts etc.), equipment containing powerful
magnets (large diffusers, etc.), areas affected by direct sunlight, rain, humidity, excessive dust, mechanical vibrations or
shocks.
-
any metal parts in proximity of the control module must be at a distance such that they do not compromise the safety
distances.
-
in compliance with Safety Standards, the device must be installed correctly and in a way to protect against any contact with
electric parts; all parts that ensure protection must be fixed in a way that they cannot be removed without the use of tools.
